หลักสูตรฝึกอบรม
อบรม เทคนิคการแก้ปัญหาอย่างเป็นระบบด้วย G8D และ 3-Legged 5-WhyGlobal 8 Disciplines (G8D) & 3-Legged 5-Why Root Cause Analysis Course (1 วัน)
หลักการและเหตุผล
ในสภาพแวดล้อมการดำเนินธุรกิจและการผลิตที่มีการแข่งขันสูง ความคาดหวังของลูกค้าต่อคุณภาพสินค้าและบริการเพิ่มสูงขึ้นอย่างต่อเนื่อง เมื่อเกิดข้อบกพร่อง ข้อร้องเรียนจากลูกค้า (Customer Complaint) หรือความสูญเสียในกระบวนการทำงาน องค์กรจำเป็นต้องมีกระบวนการแก้ไขปัญหาที่รวดเร็ว แม่นยำ และเป็นมาตรฐานสากล เพื่อหยุดยั้งผลกระทบไม่ให้ลุกลามและป้องกันไม่ให้เกิดปัญหาซ้ำ
กระบวนการ Global 8 Disciplines (G8D) เป็นเครื่องมือแก้ไขปัญหาอย่างเป็นระบบที่ได้รับการยอมรับอย่างแพร่หลายในระดับสากล โดยเฉพาะในอุตสาหกรรมยานยนต์ อย่างไรก็ตาม ในทางปฏิบัติหลายองค์กรประสบปัญหาในการค้นหาสาเหตุรากเหง้าที่แท้จริง (Root Cause) ในขั้นตอน D4 ส่งผลให้มาตรการแก้ไขไม่ตรงจุดและปัญหาเดิมเกิดซ้ำ เทคนิค 3-Legged 5-Why จึงเข้ามาช่วยยกระดับการวิเคราะห์สาเหตุให้ครอบคลุมทั้ง 3 มิติ ได้แก่ สาเหตุที่ทำให้เกิดปัญหา (Occurrence) สาเหตุที่ทำให้ตรวจจับปัญหาไม่ได้ (Detection / Escape) และสาเหตุเชิงระบบการบริหารจัดการ (Systemic)
หลักสูตรนี้ออกแบบมาเพื่อเสริมสร้างทักษะให้บุคลากรสามารถเชื่อมโยงเครื่องมือทั้งสองเข้าด้วยกัน และนำไปปฏิบัติจริงในการจัดการข้อร้องเรียนและความผิดปกติในกระบวนการได้อย่างมีประสิทธิภาพ
วัตถุประสงค์หลักสูตร
- เพื่อให้เข้าใจกระบวนการ G8D อย่างถ่องแท้ และดำเนินขั้นตอนการแก้ไขปัญหาตั้งแต่ D0 ถึง D8 ได้อย่างเป็นลำดับ ครบถ้วน และเป็นมาตรฐานสากล
- เพื่อให้วิเคราะห์สาเหตุรากเหง้าได้รอบด้าน โดยประยุกต์ใช้เทคนิค 3-Legged 5-Why แยกแยะสาเหตุที่ทำให้เกิดปัญหา สาเหตุที่หลุดรอดการตรวจสอบ และสาเหตุเชิงระบบ
- เพื่อให้กำหนดมาตรการแก้ไขถาวร (Permanent Corrective Action) และมาตรการป้องกัน (Preventive Action) ที่ตรงจุด และลดอัตราการเกิดปัญหาซ้ำ (Recurrence)
- เพื่อให้จัดทำรายงาน G8D ฉบับสมบูรณ์ (D0–D8) ที่ทวนสอบได้
รายละเอียดหลักสูตร
| วันและเวลา | หัวข้อการอบรม |
| 09:00 – 10:30 | Module 1: พื้นฐานการแก้ปัญหาและภาพรวมกระบวนการ G8D (D0 – D3) • ทำความรู้จักโครงสร้าง Global 8 Disciplines (G8D) • D0: การเตรียมความพร้อมและการประเมินสถานการณ์เบื้องต้น • D1: การจัดตั้งทีมงานแก้ไขปัญหาข้ามสายงาน (Cross-Functional Team) • D2: การระบุและนิยามปัญหาให้ชัดเจนด้วยหลัก 5W2H และ Is / Is-Not • D3: การกำหนดมาตรการกักกันปัญหาชั่วคราว (Interim Containment Action – ICA) เพื่อปกป้องลูกค้าทันที • Workshop 1: การเขียนระบุนิยามปัญหา (D2) |
| 10:30 – 10:45 | พักรับประทานอาหารว่าง |
| 10:45 – 12:00 | Module 2: เทคนิคการวิเคราะห์สาเหตุรากเหง้าด้วย 3-Legged 5-Why (D4) • D4: การระบุและพิสูจน์สาเหตุรากเหง้าของปัญหา (Root Cause Analysis) • ผังก้างปลา (Ishikawa Diagram) • หลักการตั้งคำถาม 5-Why อย่างมีตรรกะ • เทคนิค 3-Legged 5-Why ทั้ง 3 ขา: Leg 1 (Occurrence) ทำไมปัญหาจึงเกิดขึ้นในกระบวนการ · Leg 2 (Detection / Escape) ทำไมระบบตรวจสอบจึงตรวจไม่พบและปล่อยให้หลุดรอด · Leg 3 (Systemic) ทำไมระบบบริหารจัดการหรือมาตรฐานจึงเอื้อให้เกิดปัญหานี้ • การพิสูจน์ยืนยันสาเหตุรากเหง้าที่แท้จริง (Root Cause Verification) |
| 12:00 – 13:00 | พักรับประทานอาหารกลางวัน |
| 13:00 – 14:30 | Module 3: ฝึกปฏิบัติการวิเคราะห์ 3-Legged 5-Why • Workshop 2: ฝึกปฏิบัติการวิเคราะห์สาเหตุด้วยผัง 3-Legged 5-Why จากโจทย์ปัญหาจริงขององค์กรหรือกรณีศึกษาจำลอง • การตรวจสอบความเชื่อมโยงของเหตุและผล (5-Why Validation) • การนำเสนอผลงานกลุ่ม (Group Presentation) |
| 14:30 – 14:45 | พักรับประทานอาหารว่าง |
| 14:45 – 16:00 | Module 4: การกำหนดมาตรการแก้ไขถาวร การป้องกัน และการปิดรายงาน (D5 – D8) • D5: การเลือกและทวนสอบมาตรการแก้ไขถาวร (Permanent Corrective Action – PCA) ให้สอดคล้องกับทั้ง 3 ขาของ 5-Why • D6: การนำมาตรการแก้ไขถาวรไปปฏิบัติจริงและยืนยันประสิทธิผล (Validation) • D7: การป้องกันการเกิดปัญหาซ้ำในเชิงระบบและการขยายผล (FMEA / Control Plan) • D8: การชื่นชมความสำเร็จของทีมงานและสรุปบทเรียน (Lessons Learned) • Workshop 3: จัดทำรายงานสรุป G8D ฉบับสมบูรณ์ (D0–D8) |
| 16:00 – 16:30 | สรุปการอบรม ถาม-ตอบ และแบบทดสอบท้ายหลักสูตร (Post Test) |
รูปแบบการอบรม: บรรยาย 40% และ Workshop 50% (ส่วนที่เหลือเป็นการถาม-ตอบและแบบทดสอบ)
ผู้ที่ควรเข้าอบรม
- วิศวกรและเจ้าหน้าที่ฝ่ายคุณภาพ (QA / QC / QMS Engineer) ผู้รับผิดชอบการจัดการข้อร้องเรียนลูกค้า การตรวจสอบคุณภาพ และการจัดทำรายงานแก้ไขปัญหา
- วิศวกรฝ่ายผลิตและวิศวกรกระบวนการ (Production / Process Engineer) ผู้ที่ต้องวิเคราะห์ความผิดปกติของเครื่องจักรและกระบวนการผลิต และลดของเสีย (Scrap / Rework)
- หัวหน้างานและผู้จัดการฝ่ายปฏิบัติการ (Supervisor / Manager) ผู้นำทีมแก้ไขปัญหาข้ามสายงาน (Team Leader / Champion) ที่ต้องทวนสอบความถูกต้องของรายงาน G8D
- บุคลากรทุกระดับที่ต้องการพัฒนาทักษะการคิดวิเคราะห์และการหาสาเหตุที่แท้จริงของปัญหาในการทำงาน
คุณสมบัติผู้เข้าอบรม
- ไม่จำเป็นต้องมีพื้นฐาน G8D มาก่อน ผู้เข้าอบรมควรนำตัวอย่างปัญหาหรือข้อร้องเรียนจริงขององค์กรมาใช้ใน Workshop
Course Summary
In a highly competitive business and manufacturing environment, customer expectations for product and service quality keep rising. When a defect, a customer complaint or a process loss occurs, the organisation needs a problem-solving process that is fast, accurate and internationally recognised, so that the impact is contained and the problem does not recur.
Global 8 Disciplines (G8D) is a systematic problem-solving process widely accepted worldwide, especially in the automotive industry. In practice, however, many organisations struggle to find the true root cause at step D4, so corrective actions miss the point and the same problem returns. The 3-Legged 5-Why technique strengthens the root-cause analysis by covering three dimensions: why the problem occurred (Occurrence), why it was not detected (Detection / Escape), and why the management system allowed it (Systemic).
This course builds the skills to link the two tools and apply them to real customer complaints and process abnormalities.
Course Objective
- Understand the G8D process thoroughly and carry out the problem-solving steps from D0 to D8 in sequence, completely and to the international standard
- Analyse root causes from every angle by applying the 3-Legged 5-Why technique to separate occurrence, escape and systemic causes
- Define permanent corrective actions and preventive actions that address the real causes and reduce recurrence
- Prepare a complete, verifiable G8D report (D0–D8)
Course Details
| Time | Topic |
| 09:00 – 10:30 | Module 1: Problem-solving fundamentals and the G8D process overview (D0 – D3) • The structure of Global 8 Disciplines (G8D) • D0: Preparation and initial assessment of the situation • D1: Forming the cross-functional problem-solving team • D2: Identifying and defining the problem with 5W2H and Is / Is-Not • D3: Interim Containment Action (ICA) to protect the customer immediately • Workshop 1: Writing the problem definition (D2) |
| 10:30 – 10:45 | Morning break |
| 10:45 – 12:00 | Module 2: Root cause analysis with 3-Legged 5-Why (D4) • D4: Identifying and verifying the root cause (Root Cause Analysis) • Ishikawa (fishbone) diagram • Asking 5-Why questions with sound logic • The three legs of 3-Legged 5-Why: Leg 1 (Occurrence) why the problem occurred in the process · Leg 2 (Detection / Escape) why the inspection system did not detect it and let it escape · Leg 3 (Systemic) why the management system or standards allowed it • Root Cause Verification |
| 12:00 – 13:00 | Lunch |
| 13:00 – 14:30 | Module 3: 3-Legged 5-Why practice • Workshop 2: Root-cause analysis with a 3-Legged 5-Why chart on a real problem from the organisation or a simulated case study • Checking the cause-and-effect chain (5-Why Validation) • Group presentation |
| 14:30 – 14:45 | Afternoon break |
| 14:45 – 16:00 | Module 4: Permanent corrective action, prevention and closing the report (D5 – D8) • D5: Choosing and verifying the Permanent Corrective Action (PCA) against all three legs of the 5-Why • D6: Implementing the permanent corrective action and validating its effectiveness • D7: Preventing recurrence at the system level and horizontal deployment (FMEA / Control Plan) • D8: Recognising the team and recording lessons learned • Workshop 3: Preparing a complete G8D report (D0–D8) |
| 16:00 – 16:30 | Wrap-up, Q&A and post test |
Training method: 40% lecture and 50% workshop (the remainder is Q&A and the post test)
Who Should Attend
- Quality engineers and officers (QA / QC / QMS) responsible for customer complaints, quality inspection and problem-solving reports
- Production and process engineers who analyse machine and process abnormalities and reduce scrap and rework
- Supervisors and operations managers who lead cross-functional problem-solving teams (Team Leader / Champion) and verify G8D reports
- Staff at any level who want to strengthen analytical thinking and root-cause finding at work
Prerequisites
- No prior G8D knowledge is required; participants are encouraged to bring real problems or complaints from their organisation for the workshops